Komatsu PC80MR-5E0, Руководство по эксплуатации и техническому обслуживанию

Страница: 247 / 412

11. Place the machine at the specified position on the trailer.
METHOD FOR SECURING MACHINE
NOTICE
• Prevent the damage to the bucket cylinder during transportation, put a block under the tip of the
bucket link so that the bucket cylinder does not touch the floor.
• Do not use the fixing hole at the rear of the track frame for towing or lifting the machine.
After loading the machine onto a trailer, secure the machine as follows.
1.
Set the machine in the posture shown in the figure.
1) Push the blade control lever forward to lower the
blade to the ground.
2) Operate the work equipment control levers to extend
bucket cylinder and arm cylinder to their stroke end,
and then lower the boom gently.
Put a block under the tip of the bucket link to prevent
the bucket cylinder from touching the floor.
3) Set the lock lever securely to LOCK position (L).
4) Stop the engine, then remove the key from the starting
switch.
2.
Close all of the doors, windows, and covers.
3.
Lock all of the doors and covers which have lock.
4.
Tie one end of each chain or wire rope of appropriate strength to the tie-down holes on the track frame.
X: 50 to 100 mm
OPERATION TRANSPORTATION
3-179
WENAM00241