Kolida KTS440 L Series, Руководство пользователя

Страница: 87 / 198

87
（
2
）
Select LINE
LINE
Set out line
1 Stn data
2 back sight data
3 define baseline
4 point
5 line
（
3
）
Select “1. Stn data.” The station data can be
manually input or read in by pressing READ key
and pressOK, return to the “Set-Out Line screen.”
Set
Stn data
NO: 0.000
EO: 0.000
ZO: 0.000
Inst.h: 0.000mm
Tgt.h: 0.000mm
READ REC OK
（
4
）
Select “3. Define Baseline”.
It is possible to press READ, to read in the
known data which is stored in memory,
Or manually input: input the start point and
end point data and press ENT.
define
baseline
Define baseline( start point 1)
Nb1: 1.686 m
Eb1: 1.128 m
Zb1: -0.132m
READ REC OK
Difine baseline ( destination point 2 )
Nb2: 1.885 m
Eb2 0.860 m
Zb2: -0.119m
READ REC MEAS OK
（
5
）
Press MEAS to measure base point
If there is no demand for measuring the start point
and destination point of the baseline, then ignore the
procedure 6.7.8. and go to procedure 9
MEAS
Measure 1st Point
Nb1: 1.686
Eb1: 1.128
Zb1: -0.132
Tgt.h.: 1.630
OBS
（
6
）
Aim at the start point and press OBS , it shows
the measurement result.
If the repetition measurement mode is turned on,
press STOP to stop it and it shows the measured
value.
OBS
Measure 1 st Pt.
N: 1.726m
E: 1.003m
Z: -0.137m
HAR 30 10‟ 23”
NO YES