Kolida KTS440 L Series, Руководство пользователя

Страница: 62 / 198

62
⑹
Perform the procedure from the step 5 to step
10 in “11.1 Distance Setting-out Measurement”
to find the point to be set out. To find the height
of the point to be set out, press SHV to display
CRD.. Press CRD. to begin Elevation
Setting-out Measurement.
SHV
+
CRD.
SO . N 0.001
E -0.006 3
Z 5.321
HAR 150°16′54″
dHA 0°00′02″
REC SHV <--> CRD.
⑺
When the measurement is completed, the
“Setting-out Observation Screen” is displayed.
Press <-->, then press CRD. to show the Setting
- out Guidance screen. The value which is
displayed on the fourth line is the height
difference to the point to be set out. The arrows
which contain 2 triangles show the required
direction to move the prism.
(If you want the difference to the point displayed
as the coordinate values, press <--> again after
measurement is completed.
<-->
+
CRD.
←
0°00′00″
↓
-0.006 3
↑
0.300
ZA 89°45′20″
HAR 150°16′54″
REC SHV <--> CRD.
⑻
Press CRD., move the prism up and down to
display the height difference value to be 0 m
(When it is near 0 m, both the arrows are
displayed. ). When the values which display on
the second, third, fourth lines are 0, the point to
be setout is found.
Meaning of arrows:
↑
：
Move upwards ↓
：
Move downwards
Note: Press FNC on keyboard to change
target height
CRD.
→ 0°00′00″
↑
0.000 3
↑
0.003
ZA 89°45′20″
HAR 150°16′54″
REC SHV <--> CRD.
⑼
Press ESC to return “Setting-Out”
measurement menu screen”.
To set out the next point, repeat the procedure
from step 4.
ESC
Set-out
1. Observation
2. Set-out
3. Stn data
4. Back sight data
5. EDM
11.4 Distance Measurement Parameters Setting
It is possible to set distance measurement parameters here, such as temperature, pressure, atmospheric correction,
prism constant correction and distance measurement mode. The user should set above parameters before
measurement.