Kolida KTS440 L Series, Руководство пользователя

Страница: 139 / 198

139
☆
Note
：
Before performing communication between KTS and other equipments, make sure that their
communication parameters should be equal.
（
Refer to “23.1 Changing Instrument Parameters”
）
20.2.5 Sending known point data to computer
Operation Procedure Key Display
⑴
Under memory mode choose “2. Known
data”and press ENT to enter known point screen.
“2. Known
data”
+
ENT
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
⑵
Choose“5. Comms output”and press
ENT.The machine starts sending known
data,then sending data amount shows in the
bottom of the screen.
5. comms
output
+
ENT
Comms output
Transfer: USB
Job: A:\COORD. PTS
Sending
STOP
⑷
Data output finished, display returns toknow
data screen.
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
20.2.6 Clearing Coordinate Data from Memory
This operation is for deleting all coordinate data in internal memory.
Operation Procedure Key Display
⑴
Under memory mode choose “2. Known
data”and press ENT to enter known point screen.
“2. Known
data”
+
ENT
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
⑵
Choose“6. clear ”and press ENT. To enter the
display for data clearing.
YES to delete, NO to cancel.
6. clear
+
ENT
Known data
Clear confirm ?
NO YES