60
⑼
Rotate the telescope up and down until the
value which displays on the second line is 0 m
(As it nears 0 m, both arrows are displayed ),
the point to be set out is now the center of the
reticle of the telescope.
←
1°00′00″
↓ 0.000
S 80.123 m 3
ZA 89°45′23″
HAR 150°16′54″
REC SHV <--> REM
⑽
Press ESC to end measurement and return
to setting-out measurement menu screen.
ESC
Set-out
1. Observation
2. Set-out
3. Stn data
4. Back sight data
5. EDM
11.3 Coordinates Setting-Out Measurement
·
This measurement is used to set out the point of a certain coordinate away from the reference point.
·
After inputting the coordinates for the point to be set out, the required horizontal angle and horizontal distance and
store them in the memory. By using the horizontal angle and distance setting-out function, the required coordinate
location can be set out.
·
It is possible to perform coordinates setting out measurement by selecting “2. S-O” from Menu Mode.
·
It is possible to output the coordinate data previously entered and set it as the setting out coordinate.
Содержание KTS440 L Series
Страница 9: ...9 3 NOMENCLATURE ...
Страница 10: ...10 ...
