86
⑹
Move the cursor to the third point, if the
coordinates is gotten by measuring, it displays
“pt_03”. If the coordinates is read from memory,
it displays the point number. (For example: 6)
When known points amount is enough to be used
in area calculation (at least 3 points), CALC key
will be displayed.
To read in coordinate data in known data and
read in Station point, observation point, in
working jobs, press READ
01
：
pt_01
02
：
6 3
03
：
pt_03
04
：
05
：
READ CALC MEAS
⑺
Press CALC to calculate and display the
result.
CALC
Points
：
5
0.338 m. sq
0.0000 ha
0.0001 acre
3.64 ft. sq
NEXT END
⑻
Press END to end calculation and return to
menu screen. Press NEXT to re-enter area
calculation.
END
Menu(2) ↑
6. Resection
7. Repetition
8. Area
9. Roads
Note
：
It is also possible to perform area measurement by pressing AREA key under MEAS mode when AREA
function is allocated in soft key. For the method, refer to “20. Key function allocation”.
17. Setting-out line
Setting-out line is used for setting out a required point at a designated distance from the base line and for finding
the distance from the baseline to a measured point.
