101
⑵
The first alignment data in memory is
displayed.
Start Point
CH
：
1046.000
N
：
201.000 m
E
：
102.000 m
READ NEXT LAST SRCH
⑶
Press NEXT to find the alignment data to be
edited.
Straight
AZ: 48.3000
Distance: 56.678 m
PREV
NEXT
SRCH P1
↓
⑷
Enter new data, press ENT to store the
modified data and to enter next point. Press
ESC to exit without saving.
Straight
AZ: 91.5631
Distance: 40..000 m
PREV NEXT SRCH P1
↓
PREV: Press this key to display the previous point data.
NEXT: Press this key to display the previous point data.
SRCH: Press this key to search for data, after pressing this key, enter the required chainage and press ENT, the
data for the chainage will be displayed.
STRT: Press this key to go to the strart of the file.
END: Press this key to go to the end of the file.
P1 : Press this key to go to page 2.
Use SRCH to edit alignment data
Operating Procedure
Operation
Display
⑴
In the “Edit alignment” screen, press SRCH
key.
SRCH
Start Point
CH
：
1046.000
N
：
200.000 m
E
：
100.000 m
PREV NEXT SRCH P1
⑵
Enter the required chaiage.
Enter the
chainage
Search HZ AL
Chain: 1111.561
OK
