62
PROCEDURE
Operating Procedure
Operation
Display
⑴
Press S-O from the second page of the
MEAS mode, or from the MENU , the
“Setting-out Measurement menu screen” is
displayed.
S-O
Set-out
1. Observation
2. Set-out
3. Stn Data
4. Back Sight Data
5. EDM
⑵
Select “3. Stn data”, then press ENT (or
press numeric key 3 directly).
Enter instrument station data (Refer to “10.1
Entering Instrument Station Data”)
Enter the prism height, measure the distance
from the center of the target to the bottom of the
pole.
“3. Stn
data” +
ENT
N0
：
123.789
E0
：
100.346
Z0
：
320.679
Inst. h
：
1.650 m
Tgt. h
：
2.100 m
READ REC OK
⑶
After inputting station data, press OK to enter
setting-out measurement menu. Select “4. Back
sight data” and press ENT (or press numeric
key 4 directly) to enter Angle Setting screen.
(Set the bearing angle while referring to “10.2
Azimuth angle setting”. The setting-out
Measurement Menu screen is displayed.
Select
“4. Back
sight data”
+
ENT
Set-out
1. Observation
2. Set-out
3. Stn data
4. Back sight data
5. EDM
⑷
Select “2. Set-out” and press ENT. Np, Ep,
Zp are the coordinates of the point to be set out.
After each entry, press ENT.
Stop entry in progress
：
ESC
Reading in data
：
READ
Recording data
：
REC
“2.
Set-out”
+
ENT
S-O
Np
：
1223.455
Ep
：
2445.670 3
Zp
：
1209.747
Tgt. h
：
1.620 m
REC REC OK
⑸
After entering above data, the required
distance and horizontal angle will be
automatically calculated and displayed on
screen. Press OK to enter the setting-out
observation screen.
OK
SO
.
H -2.193 m
H 0.043 m
ZA 89°45′23″
3
HAR
150°16′54″
dHA -0°00′06″
REC SHV <--> REM
