Kofax Image Products VirtualReScan 3.5, Руководство по установке

Страница: 52 / 56

Appendix E
44
VRS Installation Guide
7
Follow the on-screen instructions to connect your scanner and complete the
installation.
8
Refer to the Post USB/FireWire Driver Installation Procedure on page 9.
Installing Fujitsu USB Drivers
This section explains the USB driver installation procedure for certain Fujitsu
scanners in a Windows 2000/XP environment. The procedure describes the
installation of the required USB driver as well as instructions for additional
configuration recommended for using the scanners with VRS. The Fujitsu fi -4110CU is
supported on Windows 2000. The Fujitsu fi -4120C and Fujitsu fi -4220 are supported
on Windows 2000 and XP. The Fujitsu fi -4110CU installation is explained here.
X
To install the USB driver for the Fujitsu fi-4110CU
1
Install the scan application you plan to use with VRS according to the
instructions provided by the manufacturer.
2
Plug in the scanner.
3
At the Found New Hardware Wizard initial screen, select Next.
4
When the Install Hardware Device Drivers screen displays, select the option
to “Search for a suitable driver for my device” and then click Next.
5
Insert the Fujitsu ScanPartner installation CD in the appropriate drive. If
AutoPlay is enabled, you may need to exit the Fujitsu installation program to
continue with the USB driver installation.
6
When the Locate Driver Files screen displays, select the checkbox labeled
“Specify a location” and then click Next.
7
At the next screen, type the following path into the text box:
G:\ISIS\WIN2K
where
G:
corresponds to the appropriate drive
8
Click OK. The next screen will confirm that the correct driver has been found
and list the path.
9
Click Next. A Digital Signature Not Found screen will appear. Click Yes to
bypass the screen.
10
Click Finish when the successful installation of the USB driver is confirmed.
11
Review the Post USB/FireWire Driver Installation Procedure on page 9.