Kofax Image Products VirtualReScan 3.5, Руководство по установке

Страница: 22 / 56

Chapter 2
14
VRS Installation Guide
Install the VRS Software
This section explains how to install the VRS software. If you are installing VRS in
conjunction with other Kofax products, refer to Appendix A, Kofax Product Installation
Guideline before you proceed.
Note
If VRS uses a TWAIN driver for your scanner, refer to TWAIN Installations on
page 8. If VRS uses a USB or FireWire interface, refer to USB and FireWire Installations
on page 9.
X
To install the VRS software
1
Close all applications on the computer where you want to install VRS and
make sure that you are logged in as a user with Administrative privileges.
Note
Although Administrative permissions are required for the user who
performs the VRS installation, no special permissions are required to use the
VRS application.
2
Insert the VRS installation CD in the appropriate drive. The CD supports
AutoPlay, so the installation will automatically start (if it does not start, run
Setup.exe from the root folder of the installation CD).
If you do not have AutoPlay enabled, select Start| Run and do
one of the
following:
• Type in D:\SETUP.EXE, where D: is the CD-ROM drive as shown in
Figure 2-5. Click OK.
• Click Browse, navigate to the CD-ROM drive, select the Setup.exe file, and
click Open. At the Run dialog box, click OK.
Figure 2-5. Windows Run Dialog Box
The VirtualReScan (VRS) installation will begin.