Kofax Image Products VirtualReScan 3.5, Руководство по установке

Страница: 29 / 56

Installation
VRS Installation Guide
21
11
Click Finish. You will be prompted to restart your computer.
Figure 2-14. Post-Installation Restart Message
12
Select the option to restart your computer now, and then click Finish. Do not
remove the VRS installation CD until the computer has been restarted,
because it is possible that scanner drivers may be installed after you reboot.
13
Once the computer has been restarted and all drivers have been installed
from the CD, remove the installation CD and store it in a safe place.
14
If applicable to your situation, proceed with the download process for a VRS
Component Installer. A VRS Component Installer is required if both of the
following apply:
• You plan to use a VRS-certified scanner that did not appear on the scanner
list presented during the standard VRS installation.
• You selected the
“I will configure my scanner using KSM at a later
time”
checkbox during the standard VRS installation.
Note
To locate a VRS Component Installer for your scanner, select the VRS
product link from the Kofax Web site Support pages. For more information,
refer to VRS Component Installers on page 2.