Koehler KV5000, Руководство по эксплуатации и инструкция, Страница: 27 / 34

KV5000 Instrument & Software
Operation and Instruction Manual
KV5000-Manual
- 23-
11. Once the wiring is completely disassembled it
is safe to remove the top assembly of the
bath.
12. Remove the six screws lining the two sides of
the top assembly with a Philips head screw
driver.
13. Make sure there is sufficient space with
cleaning clothes to place the top assembly
when lifted off the bath.
14. Lift the top assembly with one hand on the
back side and one hand on the front side of
the top assembly. Place top plate assembly on
flat surface with the back side of the top plate
assembly and the heating coils on the surface.
15. With the top plate assembly now removed
from the main instrument it is now easy to
access the inside of the bath jar for further
cleaning.
16. With the top assembly resting on its back, it is
now possible to clean the heating coils, stirrer
blade and rod and other components that
have been in contact with the bath medium
during operation.
17. Once the bath jar and top assembly are clean
and dry, re-assemble the instrument and fill
the bath with new medium as per section 5.1
of this document.
8.4 Changing Bath Lamp / Bulb
1. Using a flat head screwdriver, remove the four
(4) silver screws located at the four corners of
the back panel.
2. Remove the back panel plate and set aside.
3. The lamp / light bulb is located at the top right
cover of the instrument. See Figure 5.
Figure 5. Lamp Location
4. Turning counterclockwise, remove the old light
bulb.
5. Replace with new light bulb and re-assemble
the back plate.