35
Wait
This makes the flowchart (current flowchart only) delay doing anything for the allotted amount
of time e.g. to keep an Output switched On for 2 seconds.
•
Select the time (in seconds) from the keypad or type in the value. The smallest wait allowed
is 0.1 seconds.
To edit: Use the ‘C’ key to clear the value or highlight and delete using your keyboard
If the software is set to Level 2 variables can be used in this command, e.g. Wait x.
Note: Variables for controlling wait times are not suitable for download to the K’NEX Interface.
Procedure
This function is used to call up a previously defined procedure. You can specify the number of times
the procedure should be repeated (if no value is entered, it will default to only running once).
•
Select the procedure’s name from the list of existing procedures or type in a new procedure name.
•
If required type in the number of times you would like the procedure to be repeated.
To edit: Select a different procedure. Highlight and delete the repeat number using your keyboard.
back to Table of Contents
