58
Revision 5.5
Parameters in Single Pulse Mode
Power output (
POWER
)
•
Use the
SELECT
key to select the field
POWER
.
•
Increase or decrease the power output value using the arrow keys.
Both keys have an automatic repetition function which increases or decreases the value
repeatedly when the key is held down. The selected value is shown on the LCD display.
Setting range: 10–25 W in steps of 1 W
Pulse duration
•
Use the
SELECT
key to select the field
PULSE
(duration of power).
•
Increase or decrease the pulse duration value using the arrow keys.
Both keys have an automatic repetition function which increases or decreases the value
gradually when the key is held down.
Setting ranges
From
To
In steps of
5 ms
10 ms
1 ms
10 ms
100 ms
10 ms
0.1 s
1 s
0.1 s
1 s
10 s
1 s
Fig. 6-5:
Single pulse display
