24
cleaning. They are flammable and explosive under
certain conditions.
Never run the generator without the air filter, otherwise
rapid engine wear may result.
1. Open the left side service door.
2. Loosen the lock plate in top of air filter, and remove the air filter.
3. Foam filter element:
■
Dismantle the foam filter element from the air filter cover.
将
■
Wash the foam filter element with warm water mixed with household detergent and
then wash the element with clean water; you can also clean the element with
nonflammable detergent and dry the foam filter element in the air.
■
Wash the foam filter element with clean oil. Do remember to extrude the
redundant oil. Too much residual oil in the element will make the engine exhaust
black smoke in start process.
■
Reassemble the foam filter element to the air filter cover.
4. Paper filter element
Replace the dirty paper filter element with new one. Never clean the paper filter
element.
5. Reassemble the air filter cover.
6. Close the left side door.
7.4 SPARK PLUG SERVICE
RECOMMENTDED SPARK PLUG: WR7DC
To ensure proper engine operation, the spark plug must be properly gapped and free
of deposits.
1. Open the left side service door.
2. Remove the spark plug cap.
Spark plug wrench
Spark plug cover
Содержание Sinemaster IG2000i
