6. STOPPING THE ENGINE
6.1 To stop the engine in an emergency, turn the engine switch to the OFF position.
In normal use:
1. Switch off the connected equipment and pull the inserted plug out.
2. Turn the engine switch to the OFF position
6.2 If the generator is started by remote control, it can by
Note: if the generator is started when the engine switch is at “START” position, it
cannot be stopped by remote control.
Stop by remote control:
Shut off the connected appliance, press the stop button and the generator shall be
stopped.
The max. remote distance is 20m. See figure 2
Stop button
Figure 2
6.3 In condition that the generator cannot be stopped by remote control, turn the
engine switch to OFF1 position, then the remote control can emergency stop the
generator in remote start status. See figure 2
21
6. STOPPING THE ENGINE
in an emergency, turn the engine switch to the OFF position.
Switch off the connected equipment and pull the inserted plug out.
Turn the engine switch to the OFF position
If the generator is started by remote control, it can by stopped by remote control.
Note: if the generator is started when the engine switch is at “START” position, it
cannot be stopped by remote control.
Shut off the connected appliance, press the stop button and the generator shall be
The max. remote distance is 20m. See figure 25.
Figure 25 Remote controller
In condition that the generator cannot be stopped by remote control, turn the
engine switch to OFF1 position, then the remote control can emergency stop the
generator in remote start status. See figure 26.
in an emergency, turn the engine switch to the OFF position.
stopped by remote control.
Note: if the generator is started when the engine switch is at “START” position, it
Shut off the connected appliance, press the stop button and the generator shall be
In condition that the generator cannot be stopped by remote control, turn the
engine switch to OFF1 position, then the remote control can emergency stop the
Содержание Sinemaster IG2000i
