15
5. GENERATOR USE
To prevent electrical shock from faulty appliances, the
generator should be grounded. Connect a length of
heavy wire between the generator's ground terminal and
an external ground source.
Figure 14 Alternator ground schematic diagram
The starting power of most appliances exceeds the rated
power. So be sure the total starting wattage of all
appliances connected is less than the generator Max.
power.
For continuous running, the total wattage shall be within
the rated power specified in this manual.
Do not exceed the current limit specified for any one
receptacle.
Do not connect the generator to a household circuit. This
could cause the damage to the generator or to electrical
appliances in the house.
Do not modify or use the generator for other purpose
than it is intended for. Also observe the following when
using the generator.
●
Do not connect generators in parallel.
●
Do not connect an extension to the exhaust pipe.
When an extension cable is required, be sure to use a
Содержание Sinemaster IG2000i
