23
7.2 Replace engine oil
Rapidly and thoroughly drain off the engine oil when the engine is still hot. See figure
27.
Figure 27 Replace the engine oil
1. Open the left side service door.
2. Take out the oil dipstick.
3. Remove the oil drain bolt, discharge the oil and then tighten the bolt.
4. Add recommended oil the check the oil level.
5. Close the left side service door.
Oil capacity: 1.1L
In order to comply with the requirements of
environmental protection, we recommend that you put
the waste engine oil in sealed container and deliver it to
maintenance station or recycling center. Never pour the
oil on the ground or to the garbage.
7.3 Air filter service
A dirty air filter will restrict air flow to the engine. Please service the air filter regularly.
Service more frequently when operating the generator in extremely dirty areas.
Do not use gasoline or low flash point solvents for
Содержание Sinemaster IG2000i
