Kipor Sinemaster IG2000i, Руководство по эксплуатации

Страница: 58 / 90

2
Connections for standby power to a building's electrical
system must be made by a qualified electrician and must
comply with all applicable laws and electrical codes.
Improper connections can allow electrical current from
the generator to back feed into the utility lines. Such back
feed may electrocute utility company workers or others
who contact the lines during a power outage, and when
utility power is restored, the generator may explode, burn,
or cause fires in the building's electrical system.
Always make a pre-operation inspection (page 9) before
you start the engine. You may prevent an accident or
equipment damage.
Place the generator at least 1m (3ft) away from buildings
or other equipment during operation.
Operate the generator on a level surface. If the generator
is tiled, fuel spillage may result.
Know how to stop the generator quickly and understand
operation of all the controls. Never permit anyone to
operate the generator without proper instructions.
Keep children and pets away from the generator when it
is in operation.
Keep away from rotating parts while the generator is
running.
The generator is a potential source of electrical shocks
when misused; do not operate with wet hands.
Do not operate the generator in rain or snow and do not
let it get wet.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.