Kingfisher KI23400 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 97 / 103

QUICK REFERENCE GUIDE: KI27400 / KI23400 SERIES 2-WAY LOSS LEST METER
KI23400/KI27400 UM-2 -
95 -
•
[For data saved in Meter mode only]: To toggle display to
show absolute power in dBm or in both dBm & watt, press
F3 repeatedly.
To view saved time and date, press and hold Toggle
Centre .
To exit memory mode, press F1 .
To retest or overwrite results
•
Note currently displayed memory location: At Main menu,
press button
above “ MEMORY ” . Note current memory
location e.g. “MEM 123” .
•
Go to the memory location for retest/overwrite, select
desired location using
+ or - , then hold down button above
“ MEMORY ” and press F2 for three seconds or until it stops
beeping.
•
Press F1 to exit Memory mode.
•
To retest: Press F3 (Meter mode) or F4 (Autotest mode) to
return to data acquiring mode. Press button above [STORE]
now will save new results in the memory location selected
above.
•
Return memory location pointer for next storage to where it
was before the retest: Press button below [HOME] then that
above “ MEMORY ” , select the desired location (“MEM 124 ”
in this example) using + or - , then hold down button above
“ MEMORY ” and press F2 for three seconds or until it stops
beeping.
•
Continue testing.
Clearing Memory
•
To clear all stored data , in Memory mode, hold down button
above “ MEMORY ” , then press and hold F2 followed by F4
until it stops beeping.
Transfer Instrument Memory Data to USB Stick:
•
At main menu, press button above “ MEMORY ” to enter
memory mode.
•
Insert USB stick into USB port ( “MEM” ) on the right side of
the instrument and, press triangular button above “ USB ” .
Wait till instrument stop beeping.
Pass/Fail Operation:
•
Loss test status for each wavelength will be shown with a
‘ ✓ ’ (pass) or ‘X’(fail) or alternating ‘ ✓ ’ / ‘X’ (marginal) on
LCD. A failed length test value (only in 2-way Autotest) will
flash.
•
Overall test result, “PASS” will be shown if:
- pass/fail check function is disabled.