Kingfisher KI23400 Series Скачать руководство пользователя страница 49

Страница: 49 / 103

TONE DETECTION AND SLOW MODE

KI23400/KI27400 UM-2

47 -

Tone Detection & Slow Mode

Tone detection

This is a useful feature of both source and meter for quick continuity /
polarity checking. It provides several practical options.

•

To enter the source tone mode, while [SOURCE HOME]

displays on the left of the screen, select [MODE], and keep
pushing [MODE] to scroll modulation options.

•

If the power meter detects a standard optical test tone (e.g.

270 Hz, 1 KHz, 2 KHz), a buzzer sounds and the display
changes to show the actual measured modulation frequency
in Hz. This is useful for fiber identification and signalling.

•

If the power meter detects a non-standard optical test tone,

the  display  changes  to  show  the  actual  measured
modulation  frequency  in  Hz.  This  is  useful  for  fiber
identification and signalling.

•

The meter can be used to check the actual modulation

frequency of test sources (between 150 and 9999 Hz).

•

If a MultiFiber ID tone is detected, a buzzer will sound and

the corresponding fiber ID xx number (1

–

12) will be

displayed. To use this feature, one or more sources with
MultiFiber ID are required. This is a very useful feature for

quick ribbon fiber polarity checking. It can also be used to
send one of 12 pre-coded signals between test staff.

Slow Mode

Slow Mode is occasionally useful to measure power on unstable
signals that accidentally trigger tone detection, or to improve test

resolution at very low power levels. In this mode, Autotest and tone
detection are disabled, and measurement integration time is extended.

•

To enter Slow Mode during turn on, hold down

(button

located in the middle row right from the centre). ‘

tonE’ will

be displayed briefly.

After releasing [F3], the symbol of “

” will be displayed to

indicate Slow Mode has been activated.

•

Alternatively, to turn Slow Mode on/off while in Meter Menu,

press and hold button below [METER MODE] then press

•

To turn on Slow Mode while in Tone detection mode, press

. This will disable tone detection.

To turn Slow Mode off (i.e. to resume Tone detection), press

to go to Meter Menu, hold

and then press

•

In Slow Mode the display will show average optical power of

the modulated signal, using a long average.

Содержание KI23400 Series








































































































Результаты поиска

Содержание KI23400 Series

Отзывы:

Похожие инструкции для KI23400 Series

Бренды по названию

Популярные бренды

Kingfisher KI23400 Series, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание KI23400 Series

Отзывы:

Похожие инструкции для KI23400 Series

Бренды по названию

Популярные бренды