Kindermann Klick & Show K-10S, Инструкция по установке и эксплуатации

Страница: 89 / 90

89
There is no sound at main-screen,
when mirroring a video by the
App
“WirelessMedia for Android“.
Due to the limit of the Android system,
Android doesn’t provide an interface
to capture the audio. In this case, there
is no sound when mirroring the video.
On the main page of the App use the
"Local Files" function to transfer files
from folders on your mobile device,
such as photos, video and audio. In
this case, video and sound will be
streamed and played from there.
No audio when transmit local file to
Base-unit. Unsupportive audio format, including
Dolby MS11, DDCO DTSLBR, DTSE,
DTS-Neo Ultra, SRS-THEATERSOUND,
DTS Studio Sound 3D, DTS HD. If possible, reformat it to the other
audio format, like DD, DD+, HE-AAC,
DTS DMP, WMA, DRA, COOK
Can’t enter the File Sharing/File
Exchange when use Klick & Show for
iOS on mobile devices. Klick & Show App is set to run
background. Due to Apple policy, any
program which set to background
can’t run anymore. Put Klick & Show application back to
front stage
Can not update (Firmware) Klick &
Show. Flash disk format is NTFS. Please re-format the flash disk to be
FAT format to update it.
After the firmware update, Klick &
Show is not running The firmware has not been loaded
correctly. The device does not start
anymore. “Force FW Upgrade”:
 Disconnect power supply from
Base-unit
 Plug the USB disk with Update
firmware „update.bin“ into the USB
port of Base-unit
 While press and hold POWER
button in the front, power on the
Base-unit by connecting the power
supply
 Wait until the blue LED in the
window is ON, loose the POWER
button
 FW is upgrading automatically.
Can not work AirPlay with
MacBook/iPhone/iPad. Operation System Requirement
macOS 10.9, IOS 8.0 and later (Klick &
Show app) are required.
 To use AirPlay, you must connect
the iOS device to the WiFi of Klick
& Show, and enable the AitPlay
feature in the Control Center.

Update the iOS device to a newer
operating system.
When using AirPlay the message is
coming “Apple TV is searched …” A firmware-update at Klick & Show
was just made.

Restart the MacBook / iPhone /
iPad, or

Restart Klick & Show, or

Perfom a Factory Reset of Klick &
Show