Kindermann Klick & Show K-10S, Инструкция по установке и эксплуатации

Страница: 45 / 90

45
 "Automatic Upgrading". Klick & Show automatically searches every night, between 0 and 7
o’clock, for one newer update, that will be automatically loaded and installed. Base-unit will
automatically re-boot and display the Home screen.
Check the current firmware: “Check for updates”.
Note:
Klick & Show uses the incremental OTA-firmware update package (package has very small size). As a
result, version jumps are automatically loaded in several consecutive nights.
 „Manual Upgrading“. Click „Check for updates“. When base-unit detects any newer firmware
available from OTA server, it shows a dialog-box, to ask if you want to download. During the
download progress, a dialog box is indicating the current firmware version number and the latest
firmware on the server. Please note the OSD messages. After finish of downloading, you can start
the upgrading immediately. After succed to update the unit will automatically rebbot to execute
the latest firmware and shows Home screen. Check the actual Firmware, see 5.9.
Note:
Klick & Show uses the incremental OTA-firmware update package (package has very small size).
If the base-unit detects more than one newer firmware from the OTA server, it will download
automatically all oft the at one time.
3. After updating the firmware of the base-unit, all Sensor buttons TOUCH must be coupled again. It
may be necessary to install a new Starter program on the user laptops. Observe the notes in chapter 7.3
below.
Notes on the OTA upgrade:
• The automatic firmware update also works when the device is in STANDBY.
• If the LAN connection is lost during download, the download will continue after LAN is working again
• The downloaded firmware will be checked after the download and deleted in case of any problems.
• A power interruption during the OTA upgrade process does not cause the device to malfunction.
• A downgrade of the firmware to an earlier version is only possible via USB stick.

Local update: Includes application software.

Full update: Includes application software and firmware.

Factory Reset, see also chapter 2.1.3.