Kindermann Klick & Show K-10S, Инструкция по установке и эксплуатации

Страница: 12 / 90

12
2. Device Setup
2.1 Connections and Buttons
Overview

Front panel

Rear Panel

Sensor-button TOUCH
2.1.1 Front Panel
ID Name Description
1 Front USB connector
USB port, for Klick & Show TOUCH pairing, mouse
control, USB touch screen, firmware upgrading
2 STANDBY-LED STANDBY-mode: green LED (2) flashing
3 POWER button
with LED indicator
Unit ON/OFF with green status-LED ON/OFF
USB port
To be able to use a Sensor-button it should be paired to the Base-unit you are using. Insert the sensor
button to an USB port of the Base-unit you are using. If necessary, the Firmware of the button is automatically
updating. Follow the instructions at screen.
Other functions of USB-port.

The USB port is used to update the software of Klick & Show.

The USB port is used for connecting a mouse to:
- Navigate in the SETTING configuration
- Control a PC desktop that is mirroring to the screen by using the Sensor-button TOUCH

Instead of a Mouse also a local connected touch Screen can be used