Kindermann Klick & Show K-10S, Инструкция по установке и эксплуатации

Страница: 20 / 90

20
 The antennas should be installed far enough (at least 50cm/1.6ft) from metallic surfaces to avoid
unwanted reflections and far enough (at least 1m/3.3ft) from other radio equipment that operates in the
same frequency range, e.g. other Wi-Fi access points, cordless telephone, microwave ovens,…. It is also
best to install antennas at least 15 cm (6 inches) from concrete walls.
 The most favorable situation is a direct line of sight between antennas and Sensor-buttons TOUCH. Any
obstruction will cause the signal to follow a longer propagation path, which can result in performance
degradation.
 Due to the particular radio pattern of the dipole antennas, the antennas should not be placed just above
potential positions of Sensor-buttons users. As a result, the advised position for the obstruction antennas
is at the side of the meeting room.
3.2 Wiring diagram Base-unit
3.3 Power Connection
Supplied is a universal power supply for mains 100 – 240 VAC, 12 VDC/2A with different, regional power
adapters.