0
K
imberly
-c
larK
* Patient Warming Systems
M000 Control Unit Operator’s Manual: U .S .
Below is a diagram (Figure 2) of the KIMBERLY-CLARK* Patient Warming System
M000 Control Unit showing the connection ports for the associated accesso-
ries . The Fluid Delivery Line, Primary and Secondary Patient Temperature Cables,
Temperature Output Cable, Remote Display Cable, and the Power Cable are all
connected to the rear of the control unit . The lengths of these accessories are
found in Table 2 .
1
Power Switch
2
RS232 Data Port
3
Latch Handle
4
Fluid Delivery Line Port (Manifold)
5
Fill Port
6
Reserved for future use
7
Patient Temperature Input
8
Patient Temperature 2 Input
9
Patient Temperature Output (Echo)
10
Fill Tube Clip
11
Drain
12
Power Cable Storage
13
Heater Fuse
14
Equipotential Terminal
15
Power Cable Connection
Figure 2
2 .2 System Diagram
of the Controller
2
13
14
15
1
12
11
10
9
8
7
6
4
5
3
Accessories
Metres
Feet
Remote Display Cable (standard)
1.1 metres
42 feet
Remote Display Cable (optional)
4.6 metres
15 feet
Power Cable
4.6 metres
15 feet
Water Supply Lines
3.0 metres
10 feet
Temperature Input Cables
3.0 metres
10 feet
Temperature Output Cable (pigtail)
13 centimetres
5 inches
Fill Tube
0.6 metres
24 inches
Table 2