Kikusui PAD-L III Series, Руководство по эксплуатации

Страница: 123 / 132

PAD-L Specifications 7-7
Type IV
PAD
35-100L
PAD
60-60L
PAD
110-30L
PAD
250-15L
Range of operation temperature and humidity 0 to 40 ℃ / 10 to 90 %RH (no dew condensation allowed)
Range of storage temperature and humidity -10 to 60℃ / 0 to 70 %RH (no dew condensation allowed)
Cooling system Forced air cooling with fan
Output polarity Positive or negative grounding possible
Isolation voltage ±250 V ±250 V ±250 V ±500 V
Insulation resistance
Across chassis and input terminals 500VDC, 30MΩmin.
Across chassis and output terminals 500VDC, 20MΩmin.
Withstanding voltage
Across input terminals and output terminals
Across input terminals and chassis
Meter display
Voltmeter Full scale, Class 2.5 (JIS) 35 V 60 V 110 V 250 V
Ammeter Full scale, Class 2.5 (JIS) 110 A 60 A 32 A 15 A
Remote control
Output voltage/control voltage ratio
35 V /
approx. 10 V
60 V /
approx. 10 V
110 V /
approx. 10 V
250 V /
approx. 10 V
Output voltage/control resistance ratio
35 V /
approx. 10kΩ
60 V /
approx. 10kΩ
110 V /
approx. 10kΩ
250 V /
approx. 10kΩ
Output current/control voltage ratio
100 A /
approx. 0.55 V
60 A /
approx. 0.45 V
30 A /
approx. 0.45 V
15 A /
approx. 0.75 V
Output current/control resistance ratio
100 A /
approx. 550 Ω
60 A /
approx. 550 Ω
30 A /
approx. 550 Ω
15 A /
approx. 550 Ω
Remote sensing Possible (compensation one way approx. 1.2 V max.)
Master-slave-control parallel operation Possible
Master-slave-control series operation Possible
Protective circuit
Operation POWER switch is turned off.
Trip temperature of thermal protector
Voltage setting range
(standard value)
6 to 38 V 7 to 66 V 20 to 130 V 50 to 280 V
Trigger pulse width
(standard value)
Input fuse rating
Output fuse rating 100 A 60 A 30 A 15 A
Weight Approx. 97 kg Approx. 99 kg Approx. 96 kg Approx. 94 kg
Dimensions See dimensional drawings.
Accessory
Operation manual 1 copy
Input fuse (spare) 1 piece (50 A)
Power cord
1 piece, 3-core cabtyre cable (8 mm
2
, approx. 4 m)
Voltage check chip 2 pieces
Guard cap (with one hexagon wrench) 1 piece
Output terminal cover 1 piece (*4) 1 piece (*5)
*4: Mounted on the unit. With four mounting screws
*5: Mounted on the unit. With two mounting screws
Should withstand 1500 VAC, 1 min. with no abnormalities
50 ms
50 A
100 ℃
Over voltage
protection (OVP)