Kikusui PAD-L III Series, Руководство по эксплуатации

Страница: 97 / 132

PAD-L Names and Functions of Controls 5-11
25 GND (Chassis ground) terminal
This terminal is connected to the unit chassis. In general, it should be connected to
the + (pos.) or - (neg.) terminal using a shorting bar. For chassis ground terminal, see
2.6 "Grounding the output terminal".
26 AC input terminal board
Provides AC power input terminals. The screw size of the terminals varies by model,
as follows:
•TYPE III models:
M5 screw
• TYPE IV models: M5 screw
• TYPE V models: M8 screw (PAD110-60L: M6 screw)
WARNING
• Incorrect handling may cause electric shock. Always follow the
instructions in section 1.5 "Connecting the AC power cord".
• Make sure that the ground terminal is securely grounded. For
details, see section 1.6 "Grounding".
27 Input voltage mark-plate (TYPE III models only)
This plate indicates the AC input voltage.
CAUTION
• The TYPE III models allow the modification of the AC input voltage
by modifying the wiring of the main power transformer inside the
unit. (200 V or 100 V)
After the AC input voltage is changed, the input voltage must
agree with the voltage indicated on the input voltage mark-plate.
For more information, see 1.4 "Changing the input power
voltage".
28 AC outlet (TYPE V models only)
Provides an output voltage of 100 V AC, 1 A.
29 Fuse holder (TYPE V models only)
Intended for the power outlet, this contains a 1 A output fuse.
Replaceable fuse: 1 A, 250 V, Slow blow type,
φ
6.4 x 31.8 mm