Kikusui PAD-L III Series, Руководство по эксплуатации

Страница: 126 / 132

7-10 Specifications PAD-L
7.3 TYPE V models specifications
Unless otherwise specified, the specifications of the unit are based on the following
conditions.
•
The load is a pure resistance.
• The - (neg.) output terminal is connected to the GND terminal.
• The unit should be used after 30 minutes warming-up time.
Standard value and theoretical value do not guarantee performance. They should be
referred to as target values only.
Type V
PAD
35-200L
PAD
60-120L
PAD
110-60L
Input
Input voltage and frequency 200 VAC±10 %, 50/60 Hz, 1 φ
Power consumption, at 200VAC, rated load Approx. 13 kVA Approx. 12 kVA Approx. 11 kVA
Output
Voltage Rated voltage 35 V 60 V 110 V
Variable range 0 to 35 V 0 to 60 V 0 to 110 V
Resolution (theoretical value) *1 6.3 mV 11 mV 20 mV
Number of turns of panel control 10 turns
Current Rated current 200 A 120A 60 A
Variable range 0 to 200 A 0 to 120 A 0 to 60 A
Resolution (theoretical value) *1 93 mA 56 mA 23 mA
Number of turns of panel control 1 turn, both of coarse and fine adjustment
Constant voltage characteristics
Ripple and noise (5Hz to 1MHz) RMS 0.5 mV 0.5 mV 1 mV
Transient response (standard value) *2, *3
Temperature coefficient (standard value) 50 ppm/℃
Constant current characteristics
Ripple and noise (5Hz to 1MHz) RMS 100 mA 50 mA 20 mA
Source effect (to±10% of AC input voltage) 30 mA 15 mA 10 mA
Load effect (to 0 to 100% of output voltage) 30 mA 15 mA 10 mA
Constant voltage operation indication C.V, green lamp indication
Constant current operation indication C.C, red lamp indication
*1: The value is calculated from the number of turns of the wire to wound potentiometer. In practice,
use 3 to 5 times each value as a target.
*2: Measured using the remote sensing function.
*3: Time necessary for output voltage to return to ±(0.05%+10mV) max. of rated value at 5 to 100%
changes of output current.
Source effect
(to±10% of AC input voltage) *2
Load effect
(to 0 to 100% of output current) *2
0.005 %+1 mV
0.005 %+2 mV
100 μs