Keysight E6610A, Руководство пользователя и программирования

Страница: 89 / 108

12 SCPI Command Reference
Keysight E6610A User and Programming Guide 89
2. Whether an SFP module is present, i.e. 1 = an
SFP module is installed, 0 = No SFP installed.
3. The SFP module's vendor name
4. The SFP module's part number
5. The SFP module's receiver power
6. The SFP module's transmit power
7. The current CPRI line rate in Mbps
8. Loss of signal: 0 = Signal present, 1 = Loss of
signal
9. Loss of Frame: 1 = LOF, 0 = No LOF
10. CPRI Link state: Operational or attempting
to synchronize
11. Preferred Ethernet pointer
12. Current Ethernet pointer
13. CPRI Link Active state: 1 = Active
14. SAP Detect: 1 = SAP Detect
15. Remote alarm: 1 = Remote alarm present, 0
= no remote alarm
16. Remote LOS: 1 = Remote LOS
17. Remote LOF: 1 = Remote LOF
18. PLL lock: 1 = PLL locked
19. TX clock locked: 1 = locked
20. RX clock locked: 1 = locked
21. E6610A's CPRI is Master or Slave
22. E6610A's CPRI core is in reset: 1 = In reset
Example result: 3100MBps, 1, AVAGO, AFCT-
57J5APZ, 361, 339.3, 2457.6, 0, 0,
OPERATIONAL, 20, 20, 1, 0, 0, 0, 0, 1, 1, 1,
MASTER, 0
SENSE Subsystem Commands
The SENSE:RADIO commands configure the RF RX1 and RX2 receivers to measure
the downlink transmitted signal from the RRH, while the SENSE:CPRI commands
configure the CPRI RX1 and RX2 to analyze the uplink signals from the RRH's
receivers.
Command Description
SENSe<1|2>:RADio:STATe ON|[OFF]|1|0 This command enables the selected RF RX input
to be ready for measurements. Default state is off,
so each input must be enabled before any