Keysight E6610A, Руководство пользователя и программирования

Страница: 83 / 108

12 SCPI Command Reference
Keysight E6610A User and Programming Guide 83
mask type. Use the corresponding TRACE command to read the
trace data.
MEASure[1]|2:RADio:EVM? Initiates a new RF capture on the selected E6610A RF RX input
and demodulate the existing capture data using the configured
demodulation test model, and return the following 20 comma
delimited results :
1. Frequency Error (Hz)
2. Time Sync (ms)
3. IQ Offset (dB)
4. Gain Imbalance (dB)
5. Quadrature Error (deg)
6. Number of Symbols Analyzed
7. Composite EVM RMS (%)
8. Composite EVM Peak (%)
9. Number of QPSK Symbols
10. QPSK EVM RMS (%)
11. QPSK EVM Peak (%)
12. Number of 16QAM Symbols
13. 16QAM EVM RMS (%)
14. 16QAM EVM Peak (%)
15. Number of 64QAM Symbols
16. 64QAM EVM RMS (%)
17. 64QAM EVM Peak (%)
18. Total Bits (number)
19. Error Bits (number)
20. Bit Error Rate
Bit error rate results are returned only if option BR1 is installed
in the E6610A; otherwise the values are zero.
The demodulation test model to be used is set using one of these
commands: CONFigure:CPRI:TMODel, or
SENSe<1|2>:RADio:CAPTure:TMODel.
This command also generates a plot file of the EVM
constellation points, which can be exported using the
appropriate TRACE command.
NOTE: If a custom waveform file is being measured, use the
command SENSe<1|2>:RADio:CAPTure:DEModtype
OFDM|SCFDMA to select the appropriate demodulation scheme
before making the EVM measurement.
MEASure[1]|2:CPRI:EVM? Initiates a new capture on the selected E6610A CPRI RX input
and demodulates the capture data using the configured
demodulation test model, and returns the following 20 comma
delimited results :
1. Frequency Error (Hz)
2. Time Sync (ms)