Keysight E6610A, Руководство пользователя и программирования

Страница: 33 / 108

7 Setting up Measurements
Keysight E6610A User and Programming Guide 33
To quickly arrange the windows, go to the menu bar and select Window > Tile
horizonally or Tile vertically. You can also arrange the windows manually.
Commit Settings to E6610A
Once you have set up all of the signal generation and analysis parameters, click the
"Commit to E6610A" button to send the settings to the E6610A.
You can select New Window > SCPI Command Log to open a window that will display
all of the SCPI commands that are sent when you click the "Commit to E6610A"
button. This can be helpful with creating automated tests.
Configure the RRH
The next step is to configure the RRH to enable it to use the CPRI data stream for RF
signal generation and transmission of digital IQ data from the receiver. This requires
knowledge of the configuration commands for the RRH, which are unique for different
manufacturers and models. The process for communicating with the RRH is also
vendor-specific. A general procedure is presented here for RRHs that use the Fast
C&M CPRI channel for pass-through of Ethernet packets.
Determine the IP Address of the RRH
To find the IP address of the RRH, establish a connection to the E6610A SCPI Server
and query the E6610A for the IP address. This can be done using a terminal emulation
program such as the freeware program PuTTY (download from www.putty.org), which
will be used in the example below.
Run the PuTTY program. In the configuration window, set Host name =
Localhost, Port = 5025, and Connection Type to "Raw" as shown below.