Keysight E6610A, Руководство пользователя и программирования

Страница: 42 / 108

8 GUI Menus and Measurement Displays
the PC's serial number and the E6610A's serial number. Only this licensed PC will be
able to download Signal Studio files to the licensed E6610A. Once those waveform
files have been downloaded into the E6610A, a different PC can be used to control the
E6610A to play back those waveforms.
Note that not all Signal Studio LTE waveforms will play back properly in the E6610A.
The waveforms must conform to the bandwidths and sample rates supported by the
E6610A. Baseband filtering should also be turned off when generating Signal Studio
waveform files for use with the E6610A, as the instrument applies its own baseband
filtering.
User-created CSV waveform files can also be used with the E6610A. The files should
contain IQ samples expressed as floating point numbers between -1 and +1. To avoid
clipping and overdriving the RRH, the IQ data should be scaled so that the highest
power that would be transmitted in the waveform is scaled to -18 dB.
To delete files that are installed in the E6610A, click to highlight the desired files in the
top window and then click the "Delete" button.
To download new waveform files into the E6610A, click the "File..." button to open a
window to navigate to the desired files and select them. The file names will be added
in the "Download Waveform" windows. You can remove any files from this list by
highlighting the files and clicking the "Remove" button. Click the "Install" button to
download the waveform files.
Static IP Address: Opens the Fallback Static IP Address dialog box that allows you to
enter a static IP address that will be used if there is no DHCP server available. To set
the static IP address, enter the desired addresses in the fields for IP Address, Network
42 Keysight E6610A User and Programming Guide