Keysight E6610A, Руководство пользователя и программирования

Страница: 19 / 108

5 GUI Installation and Initial Start-up
Keysight E6610A User and Programming Guide 19
2. Follow the instructions on the Web site and be prepared to enter the following
information:
Order number
Entitlement certificate number
Host information (copy and paste this from the License Management win-
dow as shown above)
A valid email address
3. You will receive an email with the license file attached.
License Installation
1. Save the license file from the email to your PC.
2. Run the Keysight License Manager software, which is available for free from
www.keysight.com/find/licensemanager.
3. In the software, go to File > Install and select the license file that you received
to install the licenses on your PC.
4. Close the Keysight License Manager software. In the E6610A GUI software,
open the License Management window. The new licenses should be listed in
the "Available" box at the bottom of the window. If they are not shown, click the
Refresh button to show the available licenses.
5. Click the Install button to install the licenses into the E6610A.
6. Close the "License Management" window. Click the Disconnect button, then
click the Connect button to reconnect to the E6610A. This will cause the
GUI software to validate the installed licenses and enable the features.
If you have purchased any Signal Studio licenses to enable
waveform playback on the E6610A, these licenses only
need to be installed on the PC that’s identified in the
license’s host information, using Keysight License
Manager. Signal Studio licenses will not appear in the
E6610A GUI software's License Management window and
do not need to be installed in the E6610A. Only the
licensed PC will be able to download Signal Studio
waveform files to the E6610A whose serial number is
included in the host information for the license. After the
waveform files have been downloaded into the E6610A,
they will be available for use even if a different PC is used
to control the E6610A.