Keysight E6610A Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 108

background image

12 SCPI Command Reference

command below for more details.

SOURce<1|2>:CPRI:ARB:IQLEVel
<value>

Configures the E6610A's IQ playback level over CPRI
to the specified value in dB relative to unit circle full
scale.

Note that the E6610A's playback waveforms are
scaled to -12 dBFS by default, and the E6610A will
play back at that level unless the user selects a
different scale with this IQLEVEL command.

SOURce<1|2>:CPRI:ARB:IQLEVel?

Queries the CPRI playback IQ level. Result is in dB relative to
unit circle full scale.

SOURce:PLAYback:STATe
ON|OFF|1|0

This command sets the master playback state to on or
off. With the master playback state set to off, the
E6610A will not playback any CPRI or RF signals.

The process to change the playback state of any RF or
CPRI playback is as follows:

1. Switch off the master playback using
SOURce:PLAYback:STATe:OFF. This will turn off all
playback and reset the playback states of each
individual playback source to off.

2. Individually enable each playback source required
using the SOURce<1|2>:RADio:ARB:STATe ON and
SOURce<1|2>:CPRI:ARB:STATe ON commands. This
will set up those sources so that when the master
playback is enabled, they will start to play back
signals.

3. Finally re-start all enabled playbacks by using the
master playback enable command
SOURce:PLAYback:STATe ON.

NOTE: It is not possible to enable or disable individual
playback sources without first stopping all
playback. Any SOURce<1|2>:RADio:ARB:STATe or
SOURce<1|2>:CPRI:ARB:STATe commands sent while
the master playback state is on will be ignored.

SOURce:PLAYback:STATe?

Returns the master playback state of the connected E6610A.

SOURce:CPRI:LINErate 1|2|3|4|5|6|7|
[AUTO]

Sets the CPRI line rate to the selected value, Default is
auto-negotiation.

SOURce:CPRI:LINerate?

Queries the CPRI line rate setting.

SOURce:CPRI:MODE
[CONSECUTIVE]|INTERLEAVED

Sets the CPRI IQ mapping mode to either consecutive or inter-
leaved. Default is consecutive.

SOURce:CPRI:MODE?

Queries the E6610A for the CPRI IQ mapping mode. Result is
CONSECUTIVE or INTERLEAVED.

SOURce:CPRI:STATus?

Returns the CPRI link status. 22 comma
separated parameters are returned :

1. The max linerate of the SFP module currently
inserted into the E6610A

88

Keysight E6610A User and Programming Guide

«
...
86
87
88
89
90
...
»

Содержание E6610A













































































































Отзывы:

Нет отзывов

Похожие инструкции для E6610A

Бренд: OMCA Страницы: 72

Бренд: Barko Hydraulics Страницы: 92

Бренд: YSI Страницы: 70

Бренд: jcb Страницы: 41

Бренд: Zetec Страницы: 23

MET ONE 3400 Series

Бренд: Hach Страницы: 48

Бренд: Hammer Strength Страницы: 18

Бренд: jablotron Страницы: 2

Бренд: jablotron Страницы: 2

Бренд: Laser Страницы: 2

Бренд: Lars Thrane Страницы: 50

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: MAGIC FX Страницы: 25

Бренд: natus Страницы: 20

Dantec Keypoint G4

Бренд: natus Страницы: 42

Бренд: natus Страницы: 149

Бренд: Yamaha Страницы: 45

Бренд: Sable Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды