S535 Wafer Acceptance Test System Administrative Guide
Section 2: S535 site preparation and installation
S535-924-01 Rev. B / January 2019
2-31
Anchors should have a minimum pullout rating of 450 kg (1000 lb) each. Install 16 anchors for
maximum protection.
8.
Return the cabinet to marked locations on the floor and use the leveling legs to lift the cabinet to
the proper height.
9.
Attach the mounting brackets to the corners with the mounting hardware provided (16 screws and
washers; 25 ft lb torque required).
10. Fasten brackets to the floor with user-supplied washers and grade-five (or higher) bolts.
The following figure shows how a floor-mounting bracket is installed.
Figure 34: S535 advanced cabinet floor mount
