background image

Appendix C. Environnemental Compliance 

 

Kaye ValProbe RT User Manual 

146 

Appendix C. Environnemental Compliance 

This appendix contains information on the following topics: 

 

WEEE Directive (see Section C.1 on page 146) 

 

Battery Disposal (see Section C.2 on page 146) 

C.1 Waste Electrical and Electronic Equipment (WEEE) Directive 

Amphenol Thermometrics, Inc. is a participant in Europe’s Waste Electrical and 
Electronic Equipment (WEEE) take-back initiative, directive 2012/19/EU. 

The equipment that you bought has required the extraction and use of natural 
resources for its production. It may contain hazardous substances that could 
impact health and the environment.

 

 

In order to avoid the dissemination of those substances in our environment and to diminish the 
pressure on the natural resources, we encourage you to use the appropriate take-back 
systems. Those systems will reuse or recycle most of the materials of your end life equipment 
in a sound way. 

The crossed-out wheeled bin symbol invites you to use those systems. 

If you need more information on the collection, reuse and recycling systems, please contact 
your local or regional waste administration. 

Contact your Amphenol Thermometrics, Inc. team for additional take-back information.

 

C.2 Battery Disposal 

This product contains a battery that cannot be disposed of as unsorted 
municipal waste in the European Union. See the product documentation for 
specific battery information. The battery is marked with this symbol, which may 
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For 
proper recycling return the battery to your supplier or to a designated collection 
point. 

 

 

Содержание ValProbe RT









































































































































































Отзывы: