Kaye ValProbe RT, Руководство пользователя

Страница: 128 / 168

Chapter 11: Qualification Reports
Kaye ValProbe RT User Manual 115
Temperature at / Below Process Temp per Sensor : The Time at/below Process
Temperature per Sensor calculates for each sensor the total time for each sensor at or below
the process temperature during the cycle. The criteria fields allow the definition of the
maximum time, the minimum time or both. To meet the minimum criteria all sensor calculated
times must be equal to or above the minimum criteria. To meet the maximum criteria all
sensor calculated times must be equal to or below the maximum criteria. If both maximum and
minimum are specified, then all sensor calculated times must be equal to or within the defined
range.
Group Max-Min (spread) per Timestamp : The Grp. Max-Min (spread)/ Timestamp calculates
the Group maximum-minimum value for each timestamp. The criteria defines the maximum
allowable spread for all timestamps during a cycle. The criterion “Passes” if all Group Max-Min
temperature timestamps are equal to or less than the defined criteria.
Group Max-Average per Timestamp : The Grp. Max-Avg/ Timestamp calculates the Group
maximum-average value for each timestamp. The criteria define the maximum allowable
difference between the maximum value and the average value for all timestamps during the
cycle. The criterion “Passes” if all Group Max-Avg temperature timestamps are equal to or less
than the defined criteria.
Group Average-Min per Timestamp : The Grp. Avg-Min/ Timestamp calculates the Group
average – minimum temperature for each timestamp. The criteria define the maximum
allowable difference between the average temp and the minimum temp for all timestamps
during the cycle. The criterion “Passes” if all the Group Avg-Min temperature timestamps are
equal to or less than the defined criteria.
Group (Max of Max)- (Min of Min) : The Grp. (Max of Max) – (Min of Min) calculates the
maximum value for all sensors in a group and all timestamps, minus the minimum value for all
sensors in the group for all timestamps in the cycle. The criteria define the maximum allowable
difference between the (Max of the Max) and the (Min of the Min) for the Cycle. The criterion
“Passes” if the calculated value is equal to or less than the defined criteria.
Accumulated Lethality for (Exposure) Cycle : The Accumulated Lethality / Exposure Cycle
criteria is only selectable if the lethality condition is defined and included in the Setup or edited
in the edit calculations tile. The calculated lethality value applies only to the selected cycle.
The calculated value is the minimum Accumulated Lethality for all sensors in the group. The
criteria define the Minimum Accumulated Lethality that must be reached by all sensors in the
Group. The criterion “Passes” if the calculated value is equal to or greater than the defined
criteria.
Accumulated Lethality as in “Edit calculations” : The Accumulated Lethality as in Edit
Calculations criteria is selectable if the lethality condition is defined and included in the Setup
or edited in the edit calculations tile. The calculated lethality value does not apply to the
selected cycle, but rather to the
Calculate Lethality field in the “Edit Calculations” tile. The
calculated value is the minimum Accumulated Lethality for all sensors in a group. The criteria
define the Minimum Accumulated Lethality that must be reached by all sensors in the Group.
The criterion “Passes” if the calculated value is equal to or greater than the defined criteria.