Katronic Technologies FLUXUS ADM 6725, Руководство по эксплуатации

Страница: 44 / 148

5 - 2
ADM 6725 E10

KA T
Program Branch MEASURING
A:54 mm Reflec
Transd.Distance
M5
Position the transducers accordingly.
The Letter A indicates that the measuring channel A is
activated. ‘Reflec’ means that the sensors must be
mounted for Reflection Mode, see chapter 5.2.3. If an
odd number for Sound Path has been selected, ‘Diagon’
appears for Diagonal Mode on this display.
!
A:
$
<>
$
=
54 mm!
S=
$$$$
M6 The upper display line shows the
signal strength.
The lower display line indicates
the suggested transducer
distance.
!
(53.8) 54.0 mm
Trans.Distance?
ENTER starts measurement
M7 If you do not require exact sound
velocity measurements, this
display can be ignored.
This display is needed for the exact
determination of the sound velocity of
the medium to be measured. For this
purpose, the instrument requires to know
the actual transducer distance, the user
has the sensors mounted at.
The distance in brackets indicates the
internal calculated transducer distance
which is suggested to the user. Please
enter the exact transducer distance for
your set-up on the right hand side of the
display.
!
54.5 m3/h
A:Volume Flow
M8
54.5 m3/h
A: +32.500 m3
M9
If M8 is displayed: If M9 is displayed:
O N
O
activates the flow totaliser.
O N
O
resets the flow totaliser to
0.
O F F
O
deactivates the flow
totaliser.
-
O
provides the total quantity
for negative flow direction.