Katronic Technologies FLUXUS ADM 6725, Руководство по эксплуатации

Страница: 22 / 148

2 - 8
FLUXUS ADM 6725 E10

KA T
Description of Flowmeter
Note: During measuring mode, FLUXUS may respond with delay to keys being pressed, as
the
measuring task has priority over key processing.
Results of key operations
General functions
1 x C = Switches the flowmeter ON .
3 x BRK = Switches the flowmeter OFF .
(In battery mode, an automatic switch-off routine is active. Should FLUXUS not be operated for
15 min. whilst waiting for an input, the instrument will be switched off automatically by this
routine.)
LIG HT
Switches the background lighting ON/OFF.
INIT
B R K
1 x BRK + C = INIT
Switching ON by pressing these keys at the same time (until
the MAIN MENU appears) will init iate FLUXUS. This means
that all parameters will revert to the factory pre-set default
values and the memory with any stored measuring values will
be cleared.
4 - 5 - 6
INIT
B R K
E NT E R
BRK + C + ENTER = RESET. When you press these
keys at the same time, the flowmeter will not switch off
in the normal fashion, but reset all routines into the initial
state. Should FLUXUS be switched on again, the
flowmeter will have cleared the internal memory
automatically.
(RESET recovers from certain malfunctions which can occur,
e.g., during power surges etc.)
Menu selections
1 x BRK = Calls the MAIN MENU
O F F
O
Cursor
'
in mode SELECTION for moving through scroll
parameters downwards (
scroll menus)
-
O
Cursor
&
in mode SELECTION for moving to the displayed
option left of the currently highlighted one
+
O
Cursor
%
in mode SELECTION for moving to the displayed
option right of the currently highlighted one
O N
O
Cursor
(
in mode SELECTION for moving through scroll
parameters upwards
(scroll menus)
Input of numerical values
(in mode INPUT)