9
Connection and setup
The individual items are selected using the
buttons. Changes to the current settings can be made
using the
buttons or the numeric keypad.
The following display appears:
Make the settings for the second tuner in the same way as for the first tuner.
Protect the channel with a PIN:
If your one cable system allows the transmission frequency to be protected by inputting a PIN, this is the menu where
that can be done. No other receiver can then use this transmission frequency unless the PIN is input.
Select the setting “On”. You then have the facility of using the numeric keypad to input a PIN code (0-255) in the line
underneath “Tuner 1 PIN code”.
Refer to the documentation supplied with your system for the settings for the SCRs, frequencies
and any PIN assigned to the tuner. You will find there a printed list showing the assignment
between the various SCRs and the respective transmission frequencies. It may happen that you
cannot freely select the PIN for protection of individual frequencies; if so, the relevant frequencies
will also be listed in the documentation for the one cable components.
Please note also that multiple receivers cannot share the same frequencies/channels - the receivers
would interfere with each other.
Do not assign the same frequencies/channels to tuner 1 and tuner 2.
Transmission channel for tuner 1:
Select a free available transmission channel (SCR 0 -
SCR 7).
Transmission frequency for tuner 1:
Here, you can select one of the free available
transmission frequencies or use the numeric keypad
to input the required frequency.
See example on the right (EXR 551) for assignment of
a transmission channel to a transmission frequency.
When you have completed all settings, press the
(green) button.
