Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 92 / 124

92
After calling up the menu you will see the
following display:
The buttons allow you to select
different sets of parameters for the search.
Satellite
Use the buttons to select the satellite that is transmitting the channels to be searched.
Make sure your reception system is aligned to the selected satellite.
Transponder Frequency
Use the buttons (transponder frequency already saved) or the number keys (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought is
broadcast.
DVB type
Use the buttons to select whether the search should be for standard channels (DVB-S (SD)) or
for HDTV channels (DVB-S2 (HDTV)).
Modulation
Use the buttons to select the appropriate type of modulation. There is no need to input the type
of modulation when searching for standard channels. Instead a fi xed display of “Automatic” appears.
When searching for HDTV channels you must enter the correct type of modulation (either QPSK or 8PSK).
Polarisation
Press the buttons to select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number keys to enter the related symbol rate.
Service ID
Use the buttons or the number keys to enter the service ID of the channel to be searched for.
Main menu - Channel search