manualshive.com logo in svg

Kathrein UFS 903 si, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 903 si Скачать руководство пользователя страница 107

107

Main menu - Service menu

Use the 

 buttons to select the desired setting (Yes/No).

Setting “No”

The receiver does not search automatically every day for newly available software or channel lists 
when performing the EPG data update. You can however perform a software update manually at 
any time, as described in this section under “Software updating”.

Setting “Yes”

The receiver searches automatically every day for newly available software or channel lists when 
performing the EPG data update. 

Note:

  

The receiver does not make the changes automatically without your approval, they are 
buffered until the next time the receiver is started.

If new software is found, you will see the 
following display when next you start the 
UFS 903:

Use the 

 buttons to select from the 

displayed options and press 

 button to 

confi rm your selection:

•  “Load in standby”: When the receiver is switched to “Standby” mode the new software is loaded

•  “Remind me later”: The message reappears the next time the receiver is started up

•  “Don’t load”: The software will not be loaded. 

Содержание UFS 903 si





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды