Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 44 / 124

44
Network search
Use the buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
When you have completed all settings, press the
$
(green) button. The following displays appear
(example):
During the search you will see the
following display (example):
Newly found channels are identifi ed with
the suffi x “New” (see example illustration
on the right).
Note:
You can cancel the search at any time by
pressing the button.
Connection and setup
After completion of the search, you will
see the following display (example):
Press the button.
The following display appears:
Confi rm the save procedure by pressing
the button. The newly found
channels are added to the end of the
existing overall list and the receiver then
skips automatically to the settings for
“Date and Time”.