manualshive.com logo in svg

Kathrein UFS 903 si, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 903 si Скачать руководство пользователя страница 43

43

If you do not want to perform a channel 

search, press the 

$

 (green) button and 

continue with the “Date and Time” section.

If you want to perform a channel search, 

use the 

 buttons to select “Yes”.

The following display appears:

Channel Search Mode

Use the 

 buttons to select the type of channels that are to be searched for. You have three options:

-  “free & scrambled” 

 

All channels are searched for

-  “only free” 

 

 

Only free-to-air channels are searched for

-  “only scrambled” 

 

Only encrypted channels are searched for

To view encrypted channels you need an appropriate CA (Conditional Access) module and 
a valid smart card together with a valid subscription to a Pay-TV provider (see also the section 
“Main menu”, “Settings”, “Common Interface”).

Connection and setup

Содержание UFS 903 si





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды