Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 67 / 124

67
the selection fi eld “Start” and use the buttons or the number keys to select the desired recording
start time. Then use the buttons to switch to the selection fi eld “End” and use the buttons
or the number keys to select the desired recording end time.
When all settings have been made, press the button to save the recording settings.
Use the buttons to select the
“Series recording” recording mode (see
screenshot on the right).
In series recording the start and fi nish of
recording are taken automatically by the
receiver from the EPG data.
Instructions for recording a series:
If every episode of a series is programmed to be recorded using the “Series recording” function, the
EPG locates the series in question in the updated schedules and automatically programmes recording
of them. A change in the time the series is broadcast is no problem for the EPG, as its programming
is based on the series title.
This does, however, mean that the schedule change needs to have been notifi ed prior to the last update
of the EPG.
EPG (Electronic Programme Guide)
Use the buttons to switch to the “PreTime” fi eld. Here you can set a lead-in time for this series
recording (the time by which the receiver starts recording earlier). The lead-in time can be set using
the buttons or the number keys (max. 20 minutes). Use the buttons to switch to the
“PostTime” fi eld. Here you can set a run-out time for this series recording (the time by which the receiver
stops recording later). The run-out time can be set using the buttons or the number keys
(max. 20 minutes). Press the button to save the recording settings.