Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 89 / 124

89
After calling up the menu you will see
the following display:
The buttons allow you to select
different sets of parameters for the
search.
In this menu you can selective search for
a frequency range for the new channels.
Main menu - Channel search
You will be asked whether you wish to save the changes or not. Use the buttons to make the
selection and confi rm with the button. If you select “Yes, save changes”, the newly found channels
will be added to the end of the channel list. Then press the button to exit the menu. The channel
list is called up on to the TV screen by pressing the button (see also the sections “Basic operation
in TV or Radio mode”, “On-Screen Displays”, “Channel List TV/Radio”).
After a search (of whatever type) the receiver shows all newly found channels in
the channel list under the rubric “New Channels”.
You will fi nd this rubric in the channel list at the end of the green overall list
(select using the buttons).
Satellite
Use the buttons to select the satellite on which the transponder you want to search is
located. Make sure your reception system is aligned to the selected satellite. You can only search one
transponder at a time. If you want to search several transponders on a satellite, you should start an
automatic search of the transmitting satellite.