manualshive.com logo in svg

Kathrein UFS 903 si, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 903 si Скачать руководство пользователя страница 18

18

Connection and setup

Buttons on the remote control required for fi rst installation:

 ... 

Numeric input

$

 (green)

Proceed to next step in 

fi rst installation

#

 (red)

Go back one step in the 

fi rst installation

Confi rm the changed 

values/setting

@

Select/change individual 

menu parameters, navigation

Cancel input, go back

Before you start to use the UFS 903, read the chapters “Safety Instructions - 
Important Instructions”, “Important Information” and “Connection and Getting 
Started” through to the item “First Installation”.

Do not connect the unit to the mains until all installation work has been properly 
carried out.

The guidance given in the “First Installation” item assumes that the receiver has 
been properly connected as per the “Safety Instructions - Important Instructions”, 
“Important Information” and “Connection and Getting Started” through to the item 
“First Installation”.

First switch your TV set on and select the AV channel slot you have used to connect the UFS 903 
to your TV set. Start up the UFS 903 by switching on the power switch on the front of the unit. 
The following display appears:

Use the 

 buttons to select the 

desired menu language for your receiver 
and confi 

rm your selection using the 

 button. The language selected will 

Always check the bar 
at the bottom of the 
on-screen display. This 
provides information on 
what to do next.

be shown highlighted in yellow. The following languages are available: German, English, French, Italian, 
Spanish, Czech, Polish and Turkish.

Press the 

$

 (green) button to move to the next menu.

Содержание UFS 903 si





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды