Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 112 / 124

112
If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver
from the front panel.
There are four buttons on the front of the receiver.
Power switch
1)
(On/Off):
The power switch allows you to switch the receiver on (operation) and off again. You have no facility
to switch the receiver into stand-by mode, since no stand-by switch is provided on the front or rear of
the unit.
TV/R button:
You can change between the TV and the radio mode using the TV/R button. If the receiver is in
stand-by mode, you can reactivate the receiver by pressing the TV/R button.
Channel down - :
The channel down button switches to the next channel down in the currently selected channel list.
Channel up + :
The channel up button switches to the next channel up in the currently selected channel list.
After the receiver has been switched off and on again, the last function to be selected is active.
Operation without the remote control
Because there are no numbered buttons, no password/PIN-protected functions
can be displayed.
1)
The unit is not completely disconnected from the power supply (see chapter „Safety Instructions - Important notes“,
„Periods of extended absence, thunderstoms, mains socket accessibility“)