Kathrein UFS 903 si, Руководство по эксплуатации

Страница: 122 / 124

122
RGB
Video signal made up of three individual colour
signals (red, green, blue)
SAT IF signal
Receiver input signal
Scart cable
21-pin connecting cable (e.g. receiver/TV)
Smart card
Card from Pay TV provider to decrypt its channels
Stand-by
Standby mode
Symbol Rate
The symbol rate describes the quantity of data
that is transmitted per second. The symbol rate
is measured in MSymbols/s and is equal to the
number of symbols received per second.
Timer function
Clock function for pre-programmed switch on and
off times
Timeshift function
Time shifted playback
Transponder
A transponder is a frequency converter which
receives TV and radio signals broadcast from the
earth, converts them and the rebroadcasts them
to the earth at a different frequency. A satellite has
several transponders.
Analogue transponders transmit only one TV
channel and possibly multiple radio channels on a
single transmission frequency.
Digital transponders simultaneously transmit
several TV and several radio programmes on a
transmission frequency. If a programme provider
is broadcasting several TV channels via a digital
transponder, we refer to the provider's channel
package. The terms “digital transponder” and
“channel package” have the same meaning.
UPnP
Stands for “Universal Plug and Play”. Further
information is available from “www.upnp.org”.
VCR/PVR connection
Connection for an external recorder (such as a
video or DVD recorder)
Video-Bit-Rate
The video bit rate describes the quantity of data
from the digitised video signal that is transmitted
per second.
Viterbi rate
The Viterbi rate (code rate, error rate) characterises
the error protection used by the programme
provider. The DVB standard provides the following
values: 1/2 - 2/3 - 3/4 - 5/6 - 7/8
Short technical guide